The heart of
the SOHO solutions is ICC's Compact Distribution Center, which is designed to
fit between 16" wall studs, and with access holes conveniently located at
the top and bottom.
The reversible hinged door provides
a professional appearance, and allows for right or left hand opening which is
convenient for use in confined spaces.
The dimensions of
the Compact Distribution Center are 18" high by 4" deep.
A
clean crisp white finish, both inside and out, reflect the quality that is built
into all ICC products.
8-PORT 10/100 Base-T
Switching Hub
TICC's 8-port
Switching Hub is ideally suited for the high speed networking
demands of any Small Office, Home Office or Residential environment. The
Switching Hub's 100 Mbps performance is well suited for high-performance networks.
The switching feature of the hub provides maximum network speed even during
periods of high network usage. Auto-negotiation and auto-sensing features
automatically select the highest speed connection to the devices, thus maintaining
maximum network performance. The Switching Hub is IEEE 802.3 complaint and
has built in LED lights to indicate power, network and collision status, and mounts
easily in the Compact Distribution Center with a Velcro ™ mounting system.
One foot CAT 5e Patch Cords (ICPCS901BL) are available for connecting the
Hub to the data Module.
5-PORT 10 Base-T Hub
ICC's 5-port
10 Base-T Hub, with its 10 Mbps speed, is an exceptional
choice for Networking PCs and peripherals in Small Office, Home Office and Residential
environments. The Hub is IEEE 802.3 complaint and provides auto-partitioning
and auto-detection features to ensure data integrity and reliability. LED
lights indicate power, network and collision status. The Hub mounts easily
in the Compact Distribution Center with a Velcro ™ mounting system.
One-foot CAT 5e Patch Cords (ICPCS901BL) are available for connecting the Hub
to the Data Module.
CATV F-Type Connectors
ICC's
one-piece high quality connectors for RG-6 shielded coaxial cable. The easy
to use compress and trap design, and nickel plating make these F-type connectors
ideal for use with Digital CATV, Satellite, and HDTV applications.
CATV Splitter Module
Our
6-Way CATV splitter module provides signal distribution of cable TV, satellite
TV and VHF/UHF antennas. Front mounted and wide spaced connectors allow for
easy access. The module provides a frequency bandwidth of 5 MHz. to 1 GHz.,
and low loss, allowing maximum signal distribution.
CATV Amplifier Modules
ICC's CATV Amplifier
Module provides signal amplification for CATV or off-the-air antenna signals.
The CATV Amplifier Features include 15db gain, very low noise level, and
a bandwidth of 54Mhz to 1Ghz. The passive return feature allows the CATV
Amplifier Module to be used with Pay-Per-View cable converters and cable modems.
The Amplifier module mounts easily in the Compact Distribution Center.
CATV Patch cords are available for connecting to the 6-way video signal splitter.
CATV Termination Cap
The CATV termination
cap is designed to terminate unused CATV splitter ports or CATV wall outlets.
8-port Telephone Modules
ICC's telephone
distribution modules provide a termination point for up to eight phone extensions,
and up to four incoming lines. Front mounted 110 punch-down terminals and
modular jacks provide easy installation. The modules are available with either
an expansion jack or RJ31X security intercept jack.
8-port Data Modules
ICC's 8 Port
data module terminates 8 CAT 5e data lines. Front mounted 110 punch-down
terminals and modular jacks provide easy installation.
Compact Distribution Center Patch Cord Options
Patch cords ideally
suited for use with the CDC are available in a wide selection to complete the
installation where Voice Expansion, Hub or CATV options are employed. ICC's
one-foot Cat 5e patch cords are ideal for connecting multiple voice modules together,
or for connecting a hub to the data module. Three foot CATV Patch Cords are
also available for applications where the optional CATV Amplifier is used ahead
of the 1:6 CATV Splitter.